Inventory

h1. This page features the listedinventory of Philipp Hukes workgroup above 150€ at the HS Emden/Leer

!{width:5cm}HSEMDEN.png! !{width:5cm}HSEMDNEILO.png!

h3. The links provided here are leading towards the subpages of the listet topics

[[Inventory Wiki]]

[[Laser]]

[[Optics]]

[[Electronics]]

[[Hardware]]

[[Telescopes]]

[[Vacuum System]]

[[Further Lab Equipment]]

h3. The following section features a total overview of the entire listed inventory.

h1. Lasers

table{width:100%}.

|_. Part |_. Partnumber |_. Specification |_. Amount |_. Location |

| Stabilized Laser SL 04/AF/ FC/APC / FC/APC | A039064|U-profile

Isolated and coupled

Adjustable LWL-coupling option and optic

PE-singlemode fiber with FC/APC and FC/APC-coupling (1m)

Polarisation-mainting | 1 | |

| HeNE Laser | N-LHP-151 | red 633nm

5.0 mW

500/1 polarized

CE | 2 | |

| Compact Laser Module with USB Connector | PL205 | 405 nm

0.9 mW | 1 | |

| Compact Laser Module with USB Connector | PL201 | 520 nm

0.9 mW | 1 | |

h1. Optics

table{width:100%}.

|_. Part |_. Partnumber |_. Specification |_. Amount |_. Location |

| 30mm Cage Mounted Variable BS/Attenuator |  VA5-PBS252/M | 690-1000 nm

M4 Tap | 1 | |

| 30mm Cage Mounted Variable BS/Attenuator |  VA5-780/M | 780 nm

M4 Tap | 1 | |

| 30mm Cage Mounted Non-Pol BS Cube |  CCM1-BS013/M | 400-700 nm

50:50

M4 Tap | 1 | |

| 30mm Cage Mounted Non-Pol BS Cube | CCM1-BS014/M | 700-1100 nm

50:50

M4 Tap | 1 | |

| 30mm Cage Mounted Polarizing BS Cube | CCM1-PBS25-633/M | 633nm

M4 Tap | 1 | |

| 16mm Cage Mounted Non-Pol BS Cube | CCM5-BS017/M | 700-1100 nm

50:50

M4 Tap | 1 | |

| Non-Pol Beamsplitter Cube | BS011 | 700-1100 nm

50:50

10mm | 1 |

| Broadband Beam Splitter Cube | BS013 | 400-700 nm

50:50

25.4 mm x 25.4 mm

1" | 1 | |

| Non-Pol Beamsplitter Cube | BS044 | 700-1100 nm

10:90 (R:T)

20 mm | 5 | |

| UVFS Plate Beamsplitter | BSN10R | 400-700 nm

10:90 (R:T)

25 mm x 26 mm

t = 1 mm | 1 | |

| UVFS Plate Beamsplitter, Coating | BST11R | 700-1100 nm

70:30 (R:T)

25 x 36 mm

t = 1 mm | 2 | |

| Fiber Collimation Pkg | F220SMA-B | 633 nm

f = 10.99 mm

NA = 0.25

SMA905 | 1 | |

| Fiber Collimation Pkg | F260SMA-A | 543 nm

f = 15.01 mm

NA = 0.17

SMA905 | 1 | |

| Fiber Collimation Pkg | F260FC-780 | 780 nm

f = 15.29 mm

NA = 0.16

FC/PC | 4 | |

| Reflective Collimator | RC02FC-P01 | 450 nm - 20 μm

Ø2 mm Beam

FC/PC | 2 | |

| Reflective Collimator | RC04FC-P01 | 450 nm - 20 μm

Ø4 mm Beam

FC/PC | 2 | |

| Reflective Collimator | RC08FC-P01 | 450 nm - 20 μm

Ø8.5 mm Beam

FC/PC | 1 | |

| Reflective Collimator | RC012FC-P01 | 450 nm - 20 μm

Ø12 mm Beam

FC/PC | 2 | |

| Reflective Collimator | RC012APC-P01 | 450 nm - 20 μm

Ø12 mm Beam

APC | 1 | |

| FC/PC Triplet Collimator | TC18FC-532 | 532 nm

f = 17.9 mm

NA = 0.28 | 1 | |

| FC/PC Triplet Collimator | TC06FC-633 | 633 nm

f = 6.01 mm

NA = 0.28 | 1 | |

| FC/PC Triplet Collimator | TC18FC-633 | 633 nm

f = 17.99 mm

NA = 0.28 | 1 | |

| FC/PC Triplet Collimator | TC06FC-780 | 780 nm

f= 6.06 mm

NA = 0.28 | 1 | |

| Wollaston Prism Quartz | WPQ10 | 400 nm - 2.0 µm

1° Beam Separation

Uncoated Quartz | 2 | |

| Ø1" Achromatic Doublet | AC254-100-AB | ARC: 400 - 1100 nm 

f = 100.0 mm | 1 | |

| Unmounted Continuously Variable ND Filter | NDC-100C-2 | Ø100 mm

OD: 0.04 - 2.0 | 1 | |

| Beam trap metric pulsed | BT610/M | 400 nm - 2.5 µm

30 W Max Avg. Power

Pulsed and CW

M4 Tap | 1 | |

| Mounted VIS Linear Polarizer | LPVIS050-MP2 | 550-1500 nm

Ø12.5 mm | 2 | |

| Solarization-Resistant MM Fiber Patch Cable | M143L02 | Ø600 µm

NA = 0.22

FC/PC-SMA

2m | 2 | |

| Unmounted 20° Circle Pattern Engineered Diffuser | ED1-C20 |  Ø1" | 1 | |

| Ulbrichtkugel | 20.220.00055 | 20 mm Polymer

3-Port system

Inner-diameter = 20 mm

Housing-diamter = 44 mm

Enterance port: Ø7 mm | 1 | |

| IR Detector Card | IR Detector Card | 700 - 1400 nm | 1 | |

| Infinity Achrovid Microscopyobjective | 56122 | 2.5X

Traffic Code: 90119000000 | 1 | |

h1. Electronics

table{width:100%}.

|_. Part |_. Partnumber |_. Specification |_. Amount |_. Location |

| Digital Oscilloscope R&S RT=6 | | RTO64

RTO6-B93

RTo6-K37

ZZA-RTO6 | 1 | |

| Power Energy Meter w. Graphics Display | PM100D | | 1 | |

| Variable Resistance BNC Feed-Trough Terminator | VT2 | 50 Ω to 100 kΩ | 8 | |

| Standard Photodiode Power Sensor | S120C | 400-1100 nm

Si

50 nW - 50 mW | 1 | |

| InGaAs Photodiode | FGA10 | 900-1700 nm

Ø1 mm Active Area

10 ns Rise Time | 2 | |

| Camera ImagingSource | DMK 42AUC03 | USB 2.0, 1/3

CMOS

monochrome

1280x 960 pixels

Global shutter

C/CS Mount

Serial number 30220324 | 1 | |

| PCB-Mounted Thermal Power Detector | TD2XP | 0.19 - 20 µm

0.5 W

2.0 mm x 2.0 mm | 1 | |

| Linear Nanopositioning Stages | ANT130L | ANT130L-160-E1-CN1-MP-PL1-TAS

Automation1-iSMC-L1-iXC2-CP0-H01-CM1-HX0-FA0-AP0-DCT0-MA0-IE1-S1-HW0-M1

Automation1-MDK-L1-MA0-LV0-S1-M1

Automation1-iXC2-10-EB1-MX1-PSO1

Cable Motor C18982-50| 1 | |

h1. Hardware

table{width:100%}.

|_. Part |_. Partnumber |_. Specification |_. Amount |_. Location |

| Breadboard | B6060AX | 600 mm x 600 mm x 58mm | 2 | |

| Aluminum Breadboard | MB3030/M | 300 mm x 300 mm x 12.7 mm

M6 Tap | 6 | |

| Dovetail Translation Stage | DTS50/M | 50mm

M6 x 1.0 Taps | 1 | |

| Kinematic 30 mm Cage Cube Insert for 25 mm Right-Angle Optics | DFM1T2 | DFM1 Series

Right-Turning | 1 | |

| 30 mm Cage Filter Wheel | CFW6/M | Six Ø1" (Ø25 mm) Filters 

M6 & M4 Taps | 2 | |

| Ø1 Gimbal Mirror Mount |  KC45D | 30 mm Cage Compatible

One Retaining Ring Included | 2 | |

| Precision Cage Rotation Mount with Micrometer Drive | CRM1PT/M | Ø1" Optics

M4 Tap | 1 | |

h1. Telescopes

table{width:100%}.

|_. Part |_. Partnumber |_. Specification |_. Amount |_. Location |

||||||

h1. Vacuum System

table{width:100%}.

|_. Part |_. Partnumber |_. Specification |_. Amount |_. Location |

||||||

h1. Further Lab Equipment

table{width:100%}.

|_. Part |_. Partnumber |_. Specification |_. Amount |_. Location |

|Interlock Kontroll System|ICS-6, LMT-ICS-6, LMT-IS-MDC-12, LMT-LEDS-2W-DE, LMT-ICS-KP-12, LMT-PUSH-BUT, LMT-LS-20-24, LMT-LS-20-CM, LMT-ICS-1-DB20-0/1, LMT-ESTOP-PB-DC|PL e (PerfomanceLevel e) nach EN ISO 13849-1

SIL4 nach EN 61508

CAT III nach EN 6

Konform zur Maschinenrichtlinie 2006/42/EG, Niederspannungsrichtlinie 2014/35/EU und EMV Richtlinie 2014/30/EU|1||