Actions
Wiki » History » Revision 48
« Previous |
Revision 48/52
(diff)
| Next »
Christian Reimers, 27/06/2023 05:23 PM
This page features the listedinventory of Philipp Hukes workgroup above 150€ at the HS Emden/Leer
¶
The links provided here are leading towards the subpages of the listet topics¶
Inventory Wiki
Lasers and Light Sources
Optics
Electronics
Hardware
Telescopes
Vacuum System
Further Lab Equipment
The following section features a total overview of the entire listed inventory.¶
Lasers and Light Sources¶
Part | Partnumber | Specification | Amount | Location |
---|---|---|---|---|
Stabilized Laser SL 04/AF/ FC/APC / FC/APC | A039064 | U-profile Isolated and coupled Adjustable LWL-coupling option and optic PE-singlemode fiber with FC/APC and FC/APC-coupling (1m) Polarisation-mainting |
1 | |
HeNE Laser | N-LHP-151 | red 633nm 5.0 mW 500/1 polarized CE |
2 | |
Compact Laser Module with USB Connector | PL205 | 405 nm 0.9 mW |
1 | |
Compact Laser Module with USB Connector | PL201 | 520 nm 0.9 mW |
1 | |
DL-1000 | ||||
Laserdiode (blue) | ||||
Laserdiode (green) | ||||
Laserdiode (red) | ||||
Xenon-Arc (lightsource) |
Optics¶
Part | Partnumber | Specification | Amount | Location |
---|---|---|---|---|
30mm Cage Mounted Variable BS/Attenuator | VA5-PBS252/M | 690-1000 nm M4 Tap |
1 | |
30mm Cage Mounted Variable BS/Attenuator | VA5-780/M | 780 nm M4 Tap |
1 | |
30mm Cage Mounted Non-Pol BS Cube | CCM1-BS013/M | 400-700 nm 50:50 M4 Tap |
1 | |
30mm Cage Mounted Non-Pol BS Cube | CCM1-BS014/M | 700-1100 nm 50:50 M4 Tap |
1 | |
30mm Cage Mounted Polarizing BS Cube | CCM1-PBS25-633/M | 633nm M4 Tap |
1 | |
16mm Cage Mounted Non-Pol BS Cube | CCM5-BS017/M | 700-1100 nm 50:50 M4 Tap |
1 | |
Non-Pol Beamsplitter Cube | BS011 | 700-1100 nm 50:50 10mm |
1 | |
Broadband Beam Splitter Cube | BS013 | 400-700 nm 50:50 25.4 mm x 25.4 mm 1" |
1 | |
Non-Pol Beamsplitter Cube | BS044 | 700-1100 nm 10:90 (R:T) 20 mm |
5 | |
UVFS Plate Beamsplitter | BSN10R | 400-700 nm 10:90 (R:T) 25 mm x 26 mm t = 1 mm |
1 | |
UVFS Plate Beamsplitter, Coating | BST11R | 700-1100 nm 70:30 (R:T) 25 x 36 mm t = 1 mm |
2 | |
Fiber Collimation Pkg | F220SMA-B | 633 nm f = 10.99 mm NA = 0.25 SMA905 |
1 | |
Fiber Collimation Pkg | F260SMA-A | 543 nm f = 15.01 mm NA = 0.17 SMA905 |
1 | |
Fiber Collimation Pkg | F260FC-780 | 780 nm f = 15.29 mm NA = 0.16 FC/PC |
4 | |
Reflective Collimator | RC02FC-P01 | 450 nm - 20 μm Ø2 mm Beam FC/PC |
2 | |
Reflective Collimator | RC04FC-P01 | 450 nm - 20 μm Ø4 mm Beam FC/PC |
2 | |
Reflective Collimator | RC08FC-P01 | 450 nm - 20 μm Ø8.5 mm Beam FC/PC |
1 | |
Reflective Collimator | RC012FC-P01 | 450 nm - 20 μm Ø12 mm Beam FC/PC |
2 | |
Reflective Collimator | RC012APC-P01 | 450 nm - 20 μm Ø12 mm Beam APC |
1 | |
FC/PC Triplet Collimator | TC18FC-532 | 532 nm f = 17.9 mm NA = 0.28 |
1 | |
FC/PC Triplet Collimator | TC06FC-633 | 633 nm f = 6.01 mm NA = 0.28 |
1 | |
FC/PC Triplet Collimator | TC18FC-633 | 633 nm f = 17.99 mm NA = 0.28 |
1 | |
FC/PC Triplet Collimator | TC06FC-780 | 780 nm f= 6.06 mm NA = 0.28 |
1 | |
Wollaston Prism Quartz | WPQ10 | 400 nm - 2.0 µm 1° Beam Separation Uncoated Quartz |
2 | |
Ø1" Achromatic Doublet | AC254-100-AB | ARC: 400 - 1100 nm f = 100.0 mm |
1 | |
Unmounted Continuously Variable ND Filter | NDC-100C-2 | Ø100 mm OD: 0.04 - 2.0 |
1 | |
Beam trap metric pulsed | BT610/M | 400 nm - 2.5 µm 30 W Max Avg. Power Pulsed and CW M4 Tap |
1 | |
Mounted VIS Linear Polarizer | LPVIS050-MP2 | 550-1500 nm Ø12.5 mm |
2 | |
Solarization-Resistant MM Fiber Patch Cable | M143L02 | Ø600 µm NA = 0.22 FC/PC-SMA 2m |
2 | |
Unmounted 20° Circle Pattern Engineered Diffuser | ED1-C20 | Ø1" | 1 | |
Ulbrichtkugel | 20.220.00055 | 20 mm Polymer 3-Port system Inner-diameter = 20 mm Housing-diamter = 44 mm Enterance port: Ø7 mm |
1 | |
IR Detector Card | IR Detector Card | 700 - 1400 nm | 1 | |
Infinity Achrovid Microscopyobjective | 56122 | 2.5X Traffic Code: 90119000000 |
1 |
Electronics¶
Part | Partnumber | Specification | Amount | Location |
---|---|---|---|---|
Digital Oscilloscope R&S RT=6 | RTO64 RTO6-B93 RTo6-K37 ZZA-RTO6 |
1 | ||
Power Energy Meter w. Graphics Display | PM100D | 1 | ||
Variable Resistance BNC Feed-Trough Terminator | VT2 | 50 Ω to 100 kΩ | 8 | |
Standard Photodiode Power Sensor | S120C | 400-1100 nm Si 50 nW - 50 mW |
1 | |
InGaAs Photodiode | FGA10 | 900-1700 nm Ø1 mm Active Area 10 ns Rise Time |
2 | |
Camera ImagingSource | DMK 42AUC03 | USB 2.0, 1/3 CMOS monochrome 1280x 960 pixels Global shutter C/CS Mount Serial number 30220324 |
1 | |
PCB-Mounted Thermal Power Detector | TD2XP | 0.19 - 20 µm 0.5 W 2.0 mm x 2.0 mm |
1 | |
Linear Nanopositioning Stages | ANT130L | ANT130L-160-E1-CN1-MP-PL1-TAS Automation1-iSMC-L1-iXC2-CP0-H01-CM1-HX0-FA0-AP0-DCT0-MA0-IE1-S1-HW0-M1 Automation1-MDK-L1-MA0-LV0-S1-M1 Automation1-iXC2-10-EB1-MX1-PSO1 Cable Motor C18982-50 |
1 | |
HF and Microwave analog Signal Generator | SMA100B | SMA100B SMAB-B92 SMAB-B103 SMAB-K720 |
1 | |
PXY 200 | T-227-00 | Accurate parallel motion Up to 200 µm motion range Without mechanical play 20-130 V |
1 | |
NV40/3 | E-101-20 | 40 mA output current per channel low noise output signal USB 2.0 Analog input and output signal Output voltage 20-130 V Piezo |
1 |
Hardware¶
Part | Partnumber | Specification | Amount | Location |
---|---|---|---|---|
Breadboard | B6060AX | 600 mm x 600 mm x 58mm | 2 | |
Aluminum Breadboard | MB3030/M | 300 mm x 300 mm x 12.7 mm M6 Tap |
6 | |
Dovetail Translation Stage | DTS50/M | 50mm M6 x 1.0 Taps |
1 | |
Kinematic 30 mm Cage Cube Insert for 25 mm Right-Angle Optics | DFM1T2 | DFM1 Series Right-Turning |
1 | |
30 mm Cage Filter Wheel | CFW6/M | Six Ø1" (Ø25 mm) Filters M6 & M4 Taps |
2 | |
Ø1 Gimbal Mirror Mount | KC45D | 30 mm Cage Compatible One Retaining Ring Included |
2 | |
Precision Cage Rotation Mount with Micrometer Drive | CRM1PT/M | Ø1" Optics M4 Tap |
1 |
Telescopes¶
Part | Partnumber | Specification | Amount | Location |
---|---|---|---|---|
Vacuum System¶
Part | Partnumber | Specification | Amount | Location |
---|---|---|---|---|
Further Lab Equipment¶
Part | Partnumber | Specification | Amount | Location |
---|---|---|---|---|
Interlock Kontroll System | ICS-6, LMT-ICS-6, LMT-IS-MDC-12, LMT-LEDS-2W-DE, LMT-ICS-KP-12, LMT-PUSH-BUT, LMT-LS-20-24, LMT-LS-20-CM, LMT-ICS-1-DB20-0/1, LMT-ESTOP-PB-DC | PL e (PerfomanceLevel e) nach EN ISO 13849-1 SIL4 nach EN 61508 CAT III nach EN 6 Konform zur Maschinenrichtlinie 2006/42/EG, Niederspannungsrichtlinie 2014/35/EU und EMV Richtlinie 2014/30/EU |
1 |
Updated by Christian Reimers almost 2 years ago · 48 revisions